Thursday, 30 June 2016

The master suite

My plans for the house have now continued on up to the top floor/attic area. Up here again I've left out the stairs as I did on the floor below. I've also made  a new floor so that I didn't have any stair holes to contend with. So now I am left with a lovely spacious area which I can make into a beautiful master suite.


I've measured up the space and decided where the walls will go to make up a small landing, ensuite bathroom and bedroom. The small landing will only be visible through the open door leading into the overall space. This will allow there to be 'stairs' leading 'off'....
The ensuite bathroom will be open to the area.
You can see how I've fitted in the ensuite in the following photos.






The ensuite takes up just a small area to the left of the whole attic area so I have plenty of space left to put in some fitted furniture. More planning and measuring ahead....









The first floor


When I began this project, using what was a relatively simple dollshouse kit, I knew from the very beginning that I was going to be making lots of changes to the original design. My plans were quite ambitious and I have wondered at times whether I would be able to pull it off. However after managing the dining room and utility area extension on the ground floor (albeit with a little help with the sawing of wood by my husband, Keith) it's beginning to look as though I might be getting there! 
So now I'm up to the first floor! The kit originally had just two rooms up here with the stairs coming up the middle (as most dolls houses do) After doing away with
the stairs (again!) and making a new floor, I now had a decent sized space in which I've created a family bathroom, a study, a bedroom and a landing together with a false door at the back (to another bedroom) By doing this I I've given the house a 'real 3d' feel to it. 
Because of no stairs being in view it was necessary to give the illusion of there being some so that is why I needed to have a landing which turns a corner...
The following photos will show you how I've managed to do this.


The rough mock up


Work in progress


The photo above is the family bathroom and the landing going around the corner to the 'stairs' and 'spare room'


The last photo shows all the rooms now on this floor - bathroom, study and bedroom and how it relates to downstairs... 

And this is the family bathroom seen only through the open door now.





The photo below is taken before the walls went up...


Bathroom


Study


Bedroom

















A sink in the utility

At last we have a sink in the utility!
I decided on a stainless steel single bowl and drainer for in here which I bought from elfminiatures.co.uk along with a monobloc tap.


As you can see I've also added a few accessories to the shelves and a double wall socket.


Another addition is the radiator


I'm nearly finished in this area now. Maybe just a few more little accessories to add yet though? I've nothing hung on those pegs above the radiator....some coats, a dog lead perhaps....? I will have to see what I can find for that!








Saturday, 25 June 2016

Family Bathroom

I've been working on the family bathroom today. When completed it will only be seen through the open door. It is the first of the three rooms which will make up this first floor.
This photo shows where it is in relation to the rest of the house.